Simpson Strong-Tie Reinforced Angle Bracket 75 x 48 x 65 x 2.50mmSKU: HWS52C50
The Simpson Strong-Tie Reinforced Angle Bracket which measures 75 x 48 x 65 x 2.50mm (L x W x H x T) is made from galvanised steel. The material is known for its formability and resistance to corrosion. The angles are generally used for connecting timber at 90-degree angles with the reinforced ribs that add on stability in the joint. The typical application includes the fastening of small trusses, cladding plates, cladding uprights, rafter anchors, cantilevers, headers. If the overall structure prevents the rotation of the purlin or the post, the tensile strength is equal to half of the given value for two angle-brackets. The resistance value to consider is equal to half of the one given for two angle-brackets. There are two shank sizes to ensure a stable connection, one is 35mm long annular ring shank nail fastener with a diameter of 4mm and the other is a 50mm long annular ring shank nail fastener with a diameter of 4mm.
- Corrosion resistant owing to galvanisation
- Reinforced ribs add extra rigidity
- Complies with BS EN 845-1 and is CE Marked
|Product Name||Simpson Strong-Tie Reinforced Angle Bracket 75 x 48 x 65 x 2.50mm|
|Manufacturer Name||Simpson Strong-Tie|
|Manufacturer Part Number||E5/2C50|
|Compliance Approvals||ISO 9001|
|Warranty Period||12 months|
|Commercial Or Domestic Use||Both|
|Product Width||48 mm|
|Product Length||75 mm|
Below are some suggested alternatives for the product you are looking to buy. Please note that you are responsible for determining whether the alternative product is suitable for the purpose for which you intend to use them.